8 Tips To Improve Your Ghost 2 Immobiliser Reviews Game

· 6 min read
8 Tips To Improve Your Ghost 2 Immobiliser Reviews Game

Ghost 2 Immobiliser

Ghost is an wireless security system that protects your car against key-cloning and hacking. It connects with the ECU unit via the CAN data networks. It is also silent, which means it can't be detected.

It can only be deactivated by pressing a certain button sequence (like PIN codes) that you've programmed with the buttons of your vehicle - like those on the steering wheel or on the centre console.

Protect Your Car from Theft

With car theft on the rise and cars being stolen in seconds It is imperative that every car owner think about the additional security measures available to them. An immobiliser is one of the best and most dependable methods to ensure your vehicle's security. Ghost immobilisers are a good alternative because they are small, concealed within the wires of your vehicle and do not emit any radio frequency signals. They are therefore untraceable and can be fitted without impacting the CAN bus system of your vehicle.

Unlike other immobilisers that rely on tags, keypad input or a specific sequence of buttons to disable them our ghost immobiliser near me can only be deactivated with the exact pin code that was created by us at the time of installation. This unique sequence of disarming uses the buttons that are already in your vehicle like those on the steering wheel, doors or centre console to stop anyone from starting and driving your car away. This makes it impossible for thieves to copy your key or use jamming/spoofing devices which can disable normal immobilisers.

Ghost immobilisers will not just stop your vehicle from being driven but also stops it from being smashed for parts. This is a rising issue in the UK due to the growing popularity of these kinds of automobiles. It can happen within minutes. TTW's ghost immobilisers can be easily programmed to shield your vehicle from these kinds of attacks.

Installing our ghost 2 immobiliser can stop your car from being taken at a service station or even if your car is being driven in the garage by an employee. The Ghost can be set to Service/Valet Mode, which only allows you, the customer to use a specific button combination.

If you would like to learn more about our ghost immobilisers or need a free quote, please contact us now. We're happy to assist you and provide peace of mind knowing that your vehicle will be protected for all times.

No Key Fobs or LED Indications to identify its location.

This non-detectable car immobiliser integrates with your cars CAN network to safeguard your vehicle from the newest kind of car theft. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators, instead it makes use of buttons found in the standard factory controls already in your vehicle such as those on the steering wheel, door panels and the center console. This generates a secret code that must be entered in order to start your vehicle, making it difficult for thieves to track.

The CAN-BUS device makers have also added additional security measures to prevent the device being hacked or bypassed. It also offers CAN-BUS blocking and a physical immobiliser cut, which means that even if your keys were stolen, the thief cannot drive away with your pride and joy.

Installing the CAN-BUS into your vehicle is a simple and quick procedure that takes just 30 minutes. We will send a member of the team to your location so that they can arrange a time and place that suits you. After  ghost immobiliser review  is fitted, you will be given an registration code as well as unique security codes to use on your smartphone and application. This makes it easier to use and give you full control over the safety of your vehicle.

The system is compatible with a wide range of modern cars, but should you own a vintage or specialized vehicle, please contact us to determine compatibility. The Ghost Immobiliser 2 including installation is priced at APS449 The car will be added to the International Security Register if installed by one of our approved installers. If you have any queries, don't hesitate to contact us with our friendly team. We'd love to hear from you.

Easy to Setup and Programming

Immobilisers are a feature of numerous modern vehicles to stop theft or hot-wiring. Immobilisers are more effective than physical deterrents, such as locking your steering wheel and wheel clamps because they are integrated into your vehicle.

The system is directly connected to the CAN data network of your vehicle and prevents it from starting until you enter the unique code. The unit is small and sealed, which means it can be placed anywhere inside your vehicle, without the need for additional wiring. It also doesn't emit a radio frequency signal so it cannot be detected by RF scanners or code grabbing equipment that is used by thieves.

Ghost utilizes the buttons on your steering wheel, door panels and centre console of your car to create a customisable (like a pin code) disarm sequence which must be entered in order to start your car. The pin code sequence can be changed at any time and is dependent on four to twenty button presses. You can also put your vehicle in Service/Valet mode so that it can be operated, but the car is not able to start or drive. This will keep your car safe when you bring it in for service or valet parking. Also, make sure that the mechanic doesn't have access to your pin code to disable your system.

If you're away from your vehicle for a prolonged period for example, on a vacation or business trip or on a business trip, you can use our app to obtain a temporary pin. You can also enter your pin code manually when you wish to drive the vehicle.

Our CAN bus immobiliser can also be compatible with a remote keyfob as well as a tracker. (Brand dependent) This will give priority to the ghost system. This can provide additional security in the event of your vehicle being stolen or your keys get lost.

If you're looking for a way to protect your vehicle from key-cloning or hacking contact us today to see how we can assist. We offer our services throughout the UK and in our dedicated installation centre in Derby.



Service/Valet Mode

Modern automobiles have sophisticated stop/start eco systems that require the proper inputs to function correctly like battery voltage, engine temperature, external temperatures and what electrical systems are operating. Sometimes, these can cause issues and can often be difficult to diagnose if it is Ghost related or not. This is especially true when the vehicle has been recently cleaned or valet parked. If this is a problem you can switch to the ghost service mode, which allows the vehicle to be driven and start up without the need for a pin. This is helpful when your car's being maintained by an independent garage or valet-parked.

To enter service mode, press the service button five times. The indicator light will flash twice when the service mode is selected. You can leave this mode at any time by entering the PIN code. Once you exit the service mode the Ghost immobiliser will return to normal operation.

This is a very discrete system that communicates with the vehicle ECU via the CAN data circuit. It connects directly to the original buttons of the vehicle and does not use radio frequency signals, as do other immobilisers. This makes it virtually impossible for any other device to hack or bypass or jam devices that mimic codes from the original key fob will are not a problem for this system.

It is a TASSA-verified anti-theft system that meets the most stringent standards for protection. It has an exclusive marking system that links to the security registry of the world, which is a requirement of insurance companies.

The ghost immobiliser has a extremely compact design and is easily hidden within the wiring of your vehicle's factory which makes it nearly impossible for thieves to track. The sealed unit is so small that it can be mounted in many areas of the vehicle, including under dashboards and on steering wheels.

The system makes use of buttons in your vehicle, such as those on the steering wheel, door panels or centre console to allow you to create a a unique and changing sequence of disarming that can be as long as 20 presses that must be entered to start your vehicle. It can be entered by anyone who has your unique pin code - it is safe and secure for you and your family members, colleagues or friends to use.